Papua New Guinea DT-1616 Processor

Product function parameters:
1.16 balanced microphone/line inputs, with 48V phantom power soft switch
2. Input gain 6dB step, no less than 9 gears; suitable for MIC and LINE levels
3.16 balanced line outputs
4. The audio processor can be connected to the network, and mobile phones, tablets, and computers can control the audio processor through wired or wireless networks.
5. Control the microphone volume, turn on and mute the microphone, and adjust the volume in real time through a mobile phone or tablet according to different speakers without having to go to the cabinet to ensure the continuity of the meeting.
6. You can adjust the balance, pressure limit, and feedback of the microphone and music, and check the status of each channel at any time.
7. The audio processor has a built-in one-in and one-out sound card, supporting music playback, recording and soft video conferencing (such as ZOOM, Tencent Conference, DingTalk Conference, etc.).
8. The computer is connected to the processor through a USB cable, and music can be played without the need to connect other cables.
9. The computer is connected to the processor via a USB cable, and the conference can be recorded. You can choose a single channel, several channels or all audio channels.
10. Built-in programmable central control function, supports 1 channel 232, 1 channel 485 and UDP interface, and can be connected to 8 channels of 232 expander.
11. It can control the power supply, signal switching, environment control, audio, etc. in the system as a whole, and realize the functions required to start the system with one click.
12. Support user-customized operation interfaces for Android and Apple, and support up to 30 devices managed by the same interface;
13. Automatic gain control AGC ensures that the output volume of the sound system is stable and does not affect the volume in the audience area caused by the speaker's distance from the microphone.
14.Support gain sharing automatic mixing (AMC)
15.4 GPIOs can be independently configured for input and output, and can be used as an independent ADC when configuring inputs
16.8-band British parametric equalization, providing 5 filter options: Parametric, Lowshelf, Highshelf, Lowpass, Highpass;
17. Bus-based AEC echo cancellation, noise suppression (ANS)
18. Each channel should have no less than 8 points of adaptive feedback suppression (AFC);
Output channels should have:
1. No less than 8-band PEQ, frequency divider, delayer, and limiter.
2. No less than 22x 18 matrix; intuitive signal routing table, controllable levels at cross points
3. No less than 16 sets of presets;
4. Support input and output channel LINK and grouping functions;
5. Input dynamic range is not less than: 110dB
6. The output dynamic range is not less than: 112dB
7. The frequency response range is not less than 20～20kHz (±0.5dB);
8.THD+N: not less than -100dB @17dBu

Product Specifications:
Processor: ADI SHARC 21489
Sampling rate/quantization bits: 48K/24bit
40bit DSP floating point operation engine
Number of analog input and output channels: 16x16
Input gain:0/10/20/30/40dB
Phantom power: +48V
Frequency response (20~20kHz):±0.5dB
Maximum level:+18dBu
Total harmonic distortion + noise: 0.002% @4dBu
Dynamic range (analog channel): 108dB
Dynamic range (Dante channel): N/A
Noise floor (A-weighted-analog): -93dBu
Noise floor (A-weighted-Dante): N/A
Common mode rejection ratio @60Hz:70dB
Channel isolation @1kHz:108dB
Input impedance (balanced connection): 5.6KΩ
Output impedance (balanced connection): 102Ω
System delay:<6ms
Working power supply: AC110~240V, 50Hz/60Hz
Dimensions (width x depth x height): 482 x 260 x 45mm
Shipping weight: 3KG